Table of Contents
Advertisement
SECURITY CODE
To access your Answering System from a remote location, you will need to enter
a 4-digit security code while the system is playing the outgoing greeting. Fac-
tory preset to 4321, you can choose any 4-digit number, providing it does not
begin with 1 or 2.
You may want to write your security code down and keep it in a convenient
place, in the event you forget the number!
36
From the Handset or Base Unit:
•
From the idle mode, press
MENU.
•
Scroll to MAILBOXES, then
press OK.
•
Scroll to either MAILBOX
SETUP line, then press OK.
•
Scroll to SEC. CODE: 4321
(showing the current setting).
Press SET.
•
Use the dial pad to enter a 4-digit
number, then press SAVE.
NUMBER OF RINGS
Program each line separately to answer calls at a predetermined number of
rings. Your options are 2, 4, 6 rings, or Toll Saver. Toll Saver will instruct the
Mailbox to answer an incoming call after 2 rings if the Mailbox contains new,
unplayed messages. If there aren't any unplayed messages, Toll Saver instructs
the Mailbox to answer after 4 rings. Use Toll Saver if you're going out of town.
When you access the Answering System remotely to check messages, if it doesn't
answer after 2 rings, hang up. You don't have any new messages and you won't
have to waste money on a long distance call.
From the Handset or Base Unit:
•
From the idle mode, press
MENU.
•
Scroll to MAILBOXES, then
press OK.
•
Scroll to either MAILBOX
SETUP line, then press OK.
•
Scroll to # OF RINGS: __. (show-
ing the current setting). Press
SET.
•
Use - or + to adjust the number
of rings for that Mailbox, then
press SAVE.
37
Advertisement
Table of Contents
