Table of Contents
Advertisement
The GIGAPHONE has an advanced
design that uses a menu structure and
soft keys to access all of the built-in
features.
Example of the idle mode display:
Press RDL to display the last 5 telephone numbers dialed. The number on
the top line is the most recent number dialed.
•
Use the
scroll keys to select the desired the number.
•
To dial the number, you can simply press a LINE or the HANDSFREE
key.
•
You can erase a redial number by scrolling until it is highlighted, then
press SELECT, and then ERASE.
•
You can save a redial number to phone book memory by scrolling until
it is highlighted, then press SELECT, and then press SAVE. Then add
a NAME to your entry by following the instructions under To Store a
Number/Name.
With the Handset in the idle (OFF) mode, press the MENU key to access the
following options:
•
CALL HISTORY (Caller ID)
•
MAILBOXES
•
HANDSET SETTINGS
•
REGISTER
Use the
scroll keys to select the desired option, then press OK.
Press the OFF/CLEAR key to step back through the menu structure. Press and
hold the OFF/CLEAR key to return to the idle menu.
BASE UNIT MENU
With the Base Unit in the idle (OFF) mode, press the MENU key to access the
following options:
•
CALL HISTORY (Caller ID)
•
MAILBOXES
•
SETUP BASE
•
DISPLAY BASE-ID
Press the CLEAR key to step back through the menu structure. Press and hold
the CLEAR key to immediately return to the idle menu.
16
Caller ID - Call Waiting ID
Your GIGAPHONE is capable of displaying the name and/or number of the
party calling before you answer the phone (Caller ID). It is also capable of
displaying Caller ID information in conjunction with a Call Waiting alert signal
(Call Waiting Caller ID). With Call Waiting Caller ID, the Caller ID data is
displayed so you can decide whether to answer the incoming call, or continue
with your current conversation.
As new Caller ID/Call Waiting ID are received, your Handset and Base
displays will alert to the new, Caller ID records, for example:
The number of new calls displayed on each system Handset and Base may not
be the same. If, for example, you answer a call on Handset 2, that Handset
will not count the Caller ID information for that call as new. However, the
other registered Handsets and Base displays will consider it a new call, and
add it to the NEW CALLS total.
After you review all new Caller ID records, the NEW CALLS status will be
turned off.
The following information explains how to access Caller ID records(Call
History):
From Handset or Base:
•
From the idle (OFF) mode, press MENU.
CALL HISTORY is highlighted. Press
OK.
The Caller ID information of the most
recent inbound call will be displayed:
•
For example: if the call was from Line
1:
•
To view other Caller ID records, use the
scroll keys. You can scroll from
newest to oldest record by using the
scroll key, or from oldest to
newest by using the
scroll key.
•
To dial the displayed number, press the
desired LINE key.
•
If you need to dial the number differently
than how it is displayed, press MENU.
DIAL OPTION * is highlighted. Press
OK.
•
Scroll to the desired dialing option, then
press DIAL or the desired LINE key to
dial the phone number.
17
Advertisement
Table of Contents
