Table of Contents
Advertisement
Adjust the settings in the fleet management
#
system, if possible.
Setting the charging program
Select Home,
Work
or Standard. The program
#
set is shown as a symbol in the media display.
Opening the socket flap in the MBUX multimedia
system
Press
Open Charg. Flap
#
flap.
%
Additional notes on charging with alternating
current: or direct current: .
Setting the maximum state of charge
You can set the maximum state of charge in incre-
ments of 10% between 50% and 100%.
Observe the notes on charging the high-voltage
#
battery (
/
page 106).
Set the maximum state of charge to the
#
desired value, for example 80%.
%
For the high-voltage battery used in this vehi-
cle, we advise against continually limiting the
maximum state of charge, but recommend
charging the high-voltage battery fully at regu-
lar intervals.
Unlocking the charging cable (mode 3 or 4)
%
When the function is active, the charging cable
is unlocked once the maximum state of charge
is reached.
Home
or Work.
Select
#
Activate or deactivate
Unlock Charging
#
Activating or deactivating location-based charging
Select
Charging Program, Home
#
Program,
Work.
Activate or deactivate
Select Based on Loca-
#
tion.
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, the
charging program is automatically switched over as
soon as parking position j is engaged.
Activating or deactivating ECO charging
Activate or deactivate the function.
#
The
ECO Charging
function limits the charge cur-
rent at charging stations in order to conserve the
vehicle's battery. If the function is activated it is
shown as a symbol in the media display.
Setting the departure time
The set departure times are used for the vehicle's
pre-entry climate control system and to predict the
state of charge at the time selected.
The charging process always starts immediately,
irrespective of the next departure time, as long as
ECO charging
%
to open the socket
#
The following charging times can be set:
R
R
Setting an individual departure time
#
or
#
Setting the repeat days
#
Cable.
Functions of the indicator lamps on the vehicle
or
Charging
socket
The charge socket flap with the Mercedes star in
the radiator grill is centrally locked and unlocked
together with the vehicle.
Driving and parking 109
is not active.
If the Range Assistant function is active, it
automatically determines, during a charging
stop, the approximate time at which the
desired state of charge will be attained. This is
used as an approximate departure time for
pre-entry climate control and is set automati-
cally. Previously set departure times cannot be
changed when the function is active.
Select
Departure
Time.
individual charging times
a
Week Profile
Select
Add New Time
and set a new departure
time.
Select ´ and adjust an existing departure
time.
The weekly profile can only be set via
"Mercedes me connect". Further information
may be found in the "Mercedes me connect"
Supplement.
Advertisement
Table of Contents
