Table of Contents
Advertisement
Sliding door button on the door frame (B-pillar)
You must reset the sliding door if there has been a
malfunction or a voltage supply interruption.
If the sliding door is open: press button
#
2
on the center console or sliding door but-
ton
3
on the door frame (B-pillar) and hold it
until the door is closed.
or
Close the sliding door with the door handle
#
(
page 48).
/
Then briefly press button
#
ter console or sliding door button
door frame (B-pillar) once, or pull the door han-
dle (
page 48) to open the sliding door com-
/
pletely.
The sliding door will be operational.
Rear-end doors
Opening and closing the rear-end doors from out-
side
& WARNING Risk of injury due to the rear-
end door swinging open
When you open a rear-end door, the following
can occur:
You or another person can be injured.
R
A person may be struck by oncoming traf-
R
fic.
This is particularly the case if you open the
rear-end door more than 90° or if it opens in
an uncontrolled manner.
Even rear-end doors which are properly closed
can swing open when the vehicle parked is on
an incline or it is windy.
Only open a rear-end door when the traf-
#
fic conditions and surroundings permit.
Always make sure that the rear-end
#
doors are properly closed.
* NOTE Damage to the rear-end doors due
When the rear-end doors are opened, any
objects obstructing the range of movement of
the rear-end doors can be damaged as well as
the vehicle.
#
Opening the right rear-end door
1
or
1
or
2
on the cen-
3
on the
#
#
Opening the left rear-end door
#
#
Opening and closing
to objects obstructing their range of move-
ment
Make sure that there is sufficient clear-
ance when opening the rear-end doors.
Pull handle 1.
Swing the rear-end door out to the side until it
engages.
Ensure that the right rear-end door is open and
engaged.
Pull release handle
1
in the direction of the
arrow.
49
Advertisement
Table of Contents
