Operating Range; Display Screen Messages - VTech t2429 Owner's Manual

Telephone Operation

Operating Range

Your t 2429 cordless telephone operates within the maximum power allowed by the
Federal Communications Commission (FCC). Even so, this handset and base can
communicate over only a certain distance — which can vary with the locations of the
base and handset, the weather, and the construction of your home or office.
If you receive a call while you are out of range, the handset might not ring — or if
it does ring, the call might not connect when you press PHONE. Move closer to the
base, then press PHONE to answer the call.
If you move out of range during a phone conversation, you might hear noise or
interference. To improve reception, move closer to the base.
If you move out of range without pressing OFF, your phone will be left off the
hook. To hang up properly, walk back into range, periodically pressing OFF.

Display Screen Messages

Screen Displays:
** RINGING **
CONNECTING...
PHONE ON
MESSAGE WAITING
** PAGING **
HOLD
BATTERY LOW
SCANNING...
NO CONNECT
RINGER OFF
91-000132-020-000.t2429 English manual (R1).pmd
When:
There is a call coming in.
The handset is waiting for dial tone.
The handset is in use.
You have received telephone company voice mail.
The base is paging the handset.
There is a call on hold.
The battery needs to be recharged.
The handset is changing to another of the 30 channels
available.
Displays and a sad tone sounds when the base power
is off and PHONE is pressed.
The handset ringer is turned off.
10
10 12/29/2004, 5:27 PM