Batteries; Battery Care And Maintenance; Replacing The Handset Battery - VTech t2429 Owner's Manual

Batteries

Battery Care and Maintenance

• The battery needs charging when:
— A new battery is installed in the handset.
— The phone beeps twice every five seconds.
— The screen displays
• Place the handset in the base so the
typically fully charged in 15 hours.
• You can keep the battery fully charged by returning the handset to the base
after each use.
• If you repeatedly get a low battery indicator, even after charging overnight,
the battery should be replaced. Use only VTech batteries.
CAUTION: To reduce the risk of fire or injury to persons or damage to the
telephone, read and follow these instructions carefully:Charge the
battery provided with or identified for use with this product only in
accordance with the instructions and limitations specified in this user
manual.

Replacing the Handset Battery

1. Remove the battery compartment cover on the handset by pressing on the
indentation and sliding the cover downward.
2. Lift out the old battery and disconnect.
3. Align the two holes in the new battery's plug with the socket pins, and snap
the plug into place. Place the battery in the compartment with the wires in the
lower left corner, along the bottom of the battery.
4. Replace the cover by sliding it up into place.
5. Replace the cover by sliding it up into place. The new battery must be charged
before using the phone. Place the handset in the base and allow it to charge
for at least 24 hours for the first charge. The telephone might operate before
that, but for best performance, let the battery charge fully.
91-000132-020-000.t2429 English manual (R1).pmd
and displays the low battery icon.
BATTERY LOW
CHARGING
19
19
light turns on. The battery is
12/29/2004, 5:27 PM