VTech t2429 Owner's Manual page 21

In Case of Difficulty
• If the buttons don't work, try placing the handset in the base for at least 15
seconds.
If you hear other calls while using your phone:
• Press CHAN/DELETE to change to another channel.
• Disconnect the base from the modular jack and plug in a corded telephone. If
you still hear other calls, the problem is probably in your wiring or local service.
Call your local telephone service company.
If you lose a call after changing channels:
You were probably almost out of range. Move closer to the base before changing
channels. Before placing another call, set the handset in the base for at least 15
seconds.
If you are unable to operate special telephone services or other equipment
requiring touch tone signals:
If you have dial pulse (rotary) service, follow the directions under Temporary Tone
Dialing in the TELEPHONE OPERATION section of this manual.
If the MESSAGE light on the base does not go off, even after youíve listened
to voice mail messages:
1. Press PROG.
2. Press until the screen displays MESSAGES WAITING.
3. Press SELECT. The screen displays LIGHT OFF: YES.
4. Press SELECT again to turn off the MESSAGE light on base.
91-000132-020-000.t2429 English manual (R1).pmd
21
21 12/29/2004, 5:27 PM