TurboChef ECO ST Owner's Manual page 23

32 LEGACY CONTROLLER OPERATION
Move a Group
To move a group to another location,
1. Place the oven in Edit Mode.
2. Touch the Group to move.
3. Touch "Move Group. "
4. The group that is to move will be highlighted
blue.
5. Touch the new location for the group.
NOTE: If a group is moved to a space that
already contains settings, the old settings
in that space will be overwritten.
Item Editing Options
To access the Edit Settings screen,
1. Touch "EDIT" to place the oven in Edit Mode.
2. Touch the group that contains the item to edit.
NOTE: Accessing Edit Mode from the item
select screen, rather than the group select screen,
will bypass this step.
Continued on next page...
ECS-1001 / Rev E / August 2023
3. From the Group Editing Options screen, touch
"Edit Items. "
4. Touch an item to edit.
5. From the Item Editing Options screen, the
operator can:
- Edit Settings (page 34)
- Name Item (page 36)
- Change Group (page 37)
- Move Item (page 37)
- Delete Item (page 38)
33
ECS-1001 / Rev E / August 2023