Britax GROW WITH YOU User Manual page 14

BRITAX Child Safety, Inc.
LUAS
Before you begin:
• Check that your vehicle has lower anchors.
• Use the vehicle belt (not lower connectors) for harness mode
installations with children who weigh more than 20.4 kg (45
lbs).
• Check that your vehicle has a top tether anchor.
• The top tether must be used at all times when installing the
child seat. Using the top tether will improve the stability of your
child seat and reduce the risk of injury. Check your vehicle
owner's manual for tether anchor locations.
• Loosen the tether and place it over the child seat back to keep
it from becoming pinned between the child seat and vehicle
seat during installation.
• Adjust the child seat to desired position and place forward
facing on the vehicle seat.
1� Pull seat cover and seat
pan forward to access the
lower connectors�
2� Route the lower connector
strap along the green belt
path behind the seat pan
and firmly press the lower
connectors onto their
adjacent lower anchors�
NOTE: Verify that the strap
is not twisted.
3� Push the child seat firmly
into the vehicle seat while
removing any slack from
the lower connector strap
to remove slack�
NOTE: The child seat is
secure when it cannot be
moved front-to-back or
side-to-side more than
2.5 cm (1 in.) at the belt
path. If the child seat
is not secure, repeat
the installation or use a
different seating location.
12