Serial Port Speed Change - Sun Microsystems Ultra 1 Series Reference Manual

Select Modem - Dial-In Only
Select Modem - Bidirectional
7. Select Apply.
8. Set your modem auto-answer switch to one of the following:
For Dial-Out Only, set the switch to Off
For Dial-In Only, set the switch to On
For Bidirectional, set the switch to On
3.2

Serial Port Speed Change

You must edit the /etc/remote file to change the speed of a serial port.
Become root (superuser), and type cd /etc.
% su
Password:
# cd /etc
1. Type vi remote.
2. Type tip speed
Typical speeds are 9600, 19200 to 38400 bps.
The device name is the serial port name — for example,
/dev/tty[a,b] or /dev/term/[a,b].
3. Press Esc and type :wq to save your file change(s) and to exit from the vi text
editor.
3-2 Sun Ultra 1 Series Reference Manual • September 1995
device-name .