Table of Contents
Advertisement
Pan diameters that can be used with the
raised pan support
Burner
UR2
RR
AUX
Using cookware
To prevent burns or damage
to the hob or the counter top
during cooking, all pans or griddles
must be placed inside the perimeter
of the hob.
Always make sure that the
control knobs are in the
(off) position after use.
Precautions when using the griddle
A few precautions are necessary if you wish to
use a griddle:
• The griddle must not extend beyond the
edge of the hob.
• Do not place the griddle over more than
one burner at the same time.
• The griddle can be pre-heated on the
burner at maximum power for no more than
10 minutes.
• Make sure that the burner flame does not
extend beyond the edge of the griddle.
• Keep a distance of at least 160 mm
between the griddle and the side and/or
rear wall, especially if it is placed on an
Ultra-Rapid burner.
• It is not recommended to use earthenware
30 - USE
Pan diameter (cm)
28 - 32
26 - 28
-
or steatite griddles.
• Never use the griddle for more than 40
minutes.
Correct positioning of the flame-spreader
crowns and burner caps
Before lighting the hob burners, make sure that
the flame-spreader crowns are correctly
positioned in their housings with their respective
burner caps. Make sure that the holes 1 in the
flame-spreader crowns are aligned with the
igniters 3 and thermocouples 2.
Correct positioning of the pan supports
The pan support grids are provided
unassembled on the hob. To position the pan
support grids correctly, follow the instructions
shown in figure.
Make sure that the pan supports are simply
centred on their respective burners, without
forcing them to be raised or tilted. If they are,
repeat the positioning procedure.
If you find that a pan is particularly unstable,
make sure that the grids have not been
positioned incorrectly.
91477A696/B
Advertisement
Table of Contents
