STI Stopper SS2xy8 Installation And Service Instructions

STI Stopper SS2xy8 Installation And Service Instructions

Push button with pneumatic timer button

Advertisement

Installation and Service Instructions
Stopper
Station Series
®
Push Button with Pneumatic Timer Button
Models SS2xy8
ADA
Compliant
ADA
Compliant

Safety Notice to Installers and Users

This push button has been tested according to UL508. Non-fire alarm initiating devices are
listed in UL category NRNT. It is important to read, understand and follow all instructions
provided with this product. It is the installer's responsibility to comply with NEC, Canadian
Electrical Code, mounting specifications according to ADA and other applicable fire and
electrical codes. After installation and testing are complete, provide a copy of this manual to all
personnel responsible for testing and maintenance of this product. To avoid electrical shock,
DO NOT attempt to install this product when power is on.
Note: To reduce potential risk, STI discourages use of a pneumatic timer button as an
emergency power disconnect or any control that may restart automatically at the end of the
timing sequence.
L'ess ai de ce bouton-poussoir a été réalisé selon UL508. Les dispositifs de déclenchement
d'alertes non incendie sont répertoriés sous la catégorie UL NRNT. Il est important de lire,
de comprendre et de suivre toutes les instructions fournies avec ce produit. Il incombe à
l'installateur de se conformer aux normes NEC, Code canadien de l'électricité, aux specifications
de montage selon l'ADA et aux autres codes de prévention des incendies et de l'électricité
en vigueur. Pour éviter un choc électrique, NE tentez PAS d'installer ce produit lorsqu'il est
sous tension. Une fois l'installation et les essais terminés, vous devez fournir une copie de ce
manuel à l'ensemble du personnel chargé de l'essai et de l'entretien de ce produit.
Note: Pour réduire un risque potentiel, STI déconseille d'utiliser le bouton-poussoir
phéumatique temporisé, pour la déconnexion d'alimentation de secours ou tout autre contrôle
qui peut être réinitialisée automatiquement à la fin de la séquence de temporisation.
We protect the things that protect you.
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stopper SS2xy8 and is the answer not in the manual?

Questions and answers

Summary of Contents for STI Stopper SS2xy8

  • Page 1 DO NOT attempt to install this product when power is on. Note: To reduce potential risk, STI discourages use of a pneumatic timer button as an emergency power disconnect or any control that may restart automatically at the end of the timing sequence.
  • Page 2 Contact Rating One set NO and one set NC Rated at 10 AMP @ 240 VAC Recognized Component listing is 1,000,000 cycles Operating Temperature of button 15° to 120°F (-9° to 49°C) Contact Diagram CONNECTION AND LEAD WIRE INSTALLATION NOTES COLOR CODE 1.
  • Page 3 Housing Installation PULL BOTTOM OF SHELL OUT AND LIFT UP UNTIL BUTTON AND SWITCH ASSEMBLY TABS ARE RELEASED FROM SLOTS IN TOP OF SWITCH ASSEMBLY. ONCE INSTALLATION IS COMPLETE, SECURE SHELL WITH SCREW AND HEX WRENCH (SHOWN). SWITCH SHELL ALLEN HEAD SCREW 3/32”...
  • Page 4 Phone: 248-673-9898 • info@sti-usa.com • www.sti-usa.com Taylor House • 34 Sherwood Road • Bromsgrove, Worcestershire • B60 3DR • England Tel: +44 (0)1527 520 999 • info@sti-emea.com • www.sti-emea.com Unit 7A • Lockhead Avenue • Airport Business Park • Waterford • X91 HWF2 • Ireland info@sti-emea.com •...

This manual is also suitable for:

Stopper station series

Table of Contents