Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for STI CMCP310 Series
Summary of Contents for STI CMCP310 Series
- Page 1 OPERATION MANUAL CMCP310 Series Switch Boxes REV. A 5-27-2009...
- Page 2 The CMCP310 Series Switchable BNC Boxes are available in three (3) types of enclosures to best suit the environment in which they will be installed.
- Page 3 Grounded at CMCP310 Switch Box Grounded at Machine Accelerometer and Temperature Sensor Powering: If needed, the CMCP310 Series Switch Box can power Accelerometers and Temperature Sensors through a 4.2mA Constant Current Diode. An external +24VDC power source is required. CMCP310 SERIES OPERATION MANUAL PAGE 3...
- Page 4 Attaching Ribbon Cable: The CMCP310 Series Switch Box requires a ribbon cable to be connected between the two PC Boards. Each connector contains two (2) cable locks. To remove the cable simply push the cable locks down and the ribbon cable will disconnect. To insert the cable, line up the arrow on the cable with the arrow on the connector press in until the cable locks clamp over the top of the ribbon cable, this will ensure that the cable does not come loose during operation.
- Page 5 UL 508A, File No. E61997: Type 4, 4X, 12 and 13 NEMA/EEMAC Type 4, 4X, 12 and 13 Enclosure Flammability Rating per UL 508A CSA File No. 42186: Type 4, 4X, 12 and 13 IEC 60529, IP CMCP310 SERIES OPERATION MANUAL PAGE 5...
- Page 6 UL 50, File No. E27567: Type 4, 12, and 13 UL 508A, File No. E61997: Type 4, 12, and 13 NEMA/EEMAC Type 4, 12, and x13 CSA, File No. 42184: Type 4 and 12 IEC 60529, IP66 CMCP310 SERIES OPERATION MANUAL PAGE 6...
- Page 7 UL 50, File No. E27567: Type 3R, 4, 4X and 12 UL 508A, File No. E61997: Type 3R, 4, 4X, and 12 NEMA/EEMAC Type 3R, 4, 4X, 12 and 13 CSA, File No. 42184: Type 4, 4X, and 12 IEC 60529, IP66 CMCP310 SERIES OPERATION MANUAL PAGE 7...
- Page 8 Check to be sure ribbon cable is inserted correctly. Align Arrows. Make sure the output loop is complete and that the correct meter range is selected. No Power Check power supply output (If Used) Check Power at CCD www.stiweb.com www.stiwebstore.com CMCP310 SERIES OPERATION MANUAL PAGE 8...
Need help?
Do you have a question about the CMCP310 Series and is the answer not in the manual?
Questions and answers