Table of Contents
Advertisement
3
Setup and function
Fig. 1:
Product overview
[1] Flush-mounted insert
[2] Sensor for sensor/switch actuator, 1/1gang
[3] Sensor for sensor/switch actuator, 2/1gang and 2/2gang
[4] Cover frame (not included in scope of delivery)
[5] Rocker (not included in scope of delivery)
This device is a sensor/switch actuator unit for decentralized flush-mounted installation. The
devices serve both as control element as well as actuator for the activation of electric loads.
Sensor and actuator are combined in a flush-mounted insert [1]. The sensor and switching
channels have been pre-programmed at the point of delivery (button top/bottom: off/on; left
rocker). However, this pre-configuration can be adjusted as required.
After connecting the load, it can be switched directly on the control element.
Additional produc t features :
Green LEDs as light for orientation and status indication
■
Exchangeable rockers with the corresponding icons
■
Product manual 2CKA001473B9185
Setup and function
Environment
│8
Advertisement
Table of Contents
