Axis M5075-G User Manual page 9

AXIS M5075-G PTZ Camera
Configure your device
1. Go to Video > Image > Wide dynamic range.
2. Use the Local contrast slider to adjust the amount of WDR.
3. Use the Tone mapping slider to adjust the amount of WDR.
4. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Compensate for barrel distortion
Barrel distortion is a phenomenon where straight lines appear increasingly bent closer to the edges of the frame. A wide field of view
often creates barrel distortion in an image. Barrel distortion correction compensates for this distortion.
Note
Barrel distortion correction affects the image resolution and field of view.
1. Go to Video > Installation > Image correction.
2. Turn on Barrel distortion correction (BDC).
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize the face of a person, you can use the
pixel counter.
1. Go to Video > Image and click
2. Click
3. In the camera's live view, adjust the size and position of the rectangle around the area of interest, for example where
you expect faces to appear.
You can see the number of pixels for each of the rectangle's sides, and decide if the values are enough for your needs.
Hide parts of the image with privacy masks
You can create one or several privacy masks to hide parts of the image.
.
for Pixel counter.
9