Axis M5075-G User Manual page 24

AXIS M5075-G PTZ Camera
The web interface
IR-cut filter:
• Auto: Select to automatically turn on and off the IR-cut filter. When the camera is in day mode, the IR-cut filter
is turned on and blocks incoming infrared light, and when in night mode, the IR-cut filter is turned off and the
camera's light sensitivity increases.
• On: Select to turn on the IR-cut filter. The image is in color, but with reduced light sensitivity.
• Off: Select to turn off the IR-cut filter. The image is in black and white for increased light sensitivity.
Threshold: Use the slider to adjust the light threshold where the camera changes from day mode to night mode.
• Move the slider towards Bright to decrease the threshold for the IR-cut filter. The camera changes to night mode
earlier.
• Move the slider towards Dark to increase the threshold for the IR-cut filter. The camera changes to night mode later.
IR light
If your device doesn't have built-in illumination, these controls are only available when you connect a supporting Axis accessory.
Allow illumination: Turn on to let the camera use the built-in light in night mode.
Synchronize illumination: Turn on to automatically synchronize the illumination with the surrounding light. The synchronization
between day and night only works if the IR-cut filter is set to Auto or Off.
Automatic illumination angle
manually.
Illumination angle
from the camera's angle of view. If the camera has a wide angle of view, you can set the illumination angle to a narrower angle,
which equals a greater tele position. This will result in dark corners in the image.
IR wavelength
White light
Allow illumination
Synchronize illumination
Exposure
Select an exposure mode to reduce rapidly changing irregular effects in the image, for example, flicker produced by different types of
light sources. We recommend you to use the automatic exposure mode, or the same frequency as your power network.
Exposure mode:
• Automatic: The camera adjusts the aperture, gain, and shutter automatically.
• Automatic aperture
• Automatic shutter
• Hold current: Locks the current exposure settings.
• Flicker-free
speeds: 1/50 s (50 Hz) and 1/60 s (60 Hz).
• Flicker-free 50 Hz
: Turn on to use the automatic illumination angle. Turn off to set the illumination angle
: Use the slider to manually set the illumination angle, for example, if the angle needs to be different
: Select the desired wavelength for the IR light.
:
: Turn on to let the camera use white light in night mode.
: Turn on to automatically synchronize the white light with the surrounding light.
: The camera adjusts the aperture and gain automatically. The shutter is fixed.
: The camera adjusts the shutter and gain automatically. The aperture is fixed.
: The camera adjusts the aperture and gain automatically, and uses only the following shutter
: The camera adjusts the aperture and gain automatically, and uses the shutter speed 1/50 s.
24