Axis M5075-G User Manual page 39

AXIS M5075-G PTZ Camera
The web interface
• Password: Enter the password for your user identity.
• Peap version: Select the Peap version that is used in the network switch.
• Label: Select 1 to use client EAP encryption; select 2 to use client PEAP encryption. Select the Label that the network
switch uses when using Peap version 1.
Prevent brute-force attacks
Blocking: Turn on to block brute-force attacks. A brute-force attack uses trial-and-error to guess login info or encryption keys.
Blocking period: Enter the number of seconds to block a brute-force attack.
Blocking conditions: Enter the number of authentication failures allowed per second before the block starts. You can set the
number of failures allowed both on page level and device level.
IP address filter
Use filter: Select to filter which IP addresses are allowed to access the device.
Policy: Choose whether to Allow or Deny access for certain IP addresses.
Addresses: Enter the IP numbers that are either allowed or denied access to the device. You can also use the CIDR format.
Custom signed firmware certificate
To install test firmware or other custom firmware from Axis on the device, you need a custom signed firmware certificate. The
certificate verifies that the firmware is approved by both the device owner and Axis. The firmware can only run on a specific
device which is identified by its unique serial number and chip ID. Only Axis can create custom signed firmware certificates,
since Axis holds the key to sign them.
Install: Click to install the certificate. You need to install the certificate before you install the firmware.
The context menu contains:
• Delete certificate: Delete the certificate.
Accounts
Accounts
Add account: Click to add a new account. You can add up to 100 accounts.
Account: Enter a unique account name.
New password: Enter a password for the account. Passwords must be 1 to 64 characters long. Only ASCII printable characters
(code 32 to 126) are allowed in the password, for example, letters, numbers, punctuation, and some symbols.
Repeat password: Enter the same password again.
Privileges:
• Administrator: Has full access to all settings. Administrators can also add, update, and remove other accounts.
• Operator: Has access to all settings except:
-
-
• Viewer: Has access to:
-
-
-
All System settings.
Adding apps.
Watch and take snapshots of a video stream.
Watch and export recordings.
Pan, tilt, and zoom; with PTZ user access.
39