Do you have a question about the 520X and is the answer not in the manual?
Questions and answers
Bob Tucker
February 21, 2025
I want to get the base off of the ProForm 520x, and get it out of my basement. It does not work.So basically disassemble for moving purposes.
1 comments:
Mr. Anderson
February 21, 2025
To disassemble the Pro-Form 520X treadmill for moving, follow these steps:
1. Lower the Incline: Adjust the treadmill to the lowest incline position to prevent damage. 2. Unplug the Power Cord: Disconnect the treadmill from the power source. 3. Fold the Treadmill: - Hold the treadmill at the designated locations. - Bend your legs and keep your back straight to avoid injury. - Lift the treadmill using your legs. - Move your right hand to the appropriate position and hold firmly. - Use your left hand to pull the latch knob to the left and hold it. - Raise the treadmill until the catch passes the latch pin. - Slowly release the latch knob, ensuring the catch is securely held by the latch pin. 4. Protect the Floor: Place a protective material under the treadmill to prevent floor damage.
These steps allow you to safely prepare the treadmill for moving.
Need help?
Do you have a question about the 520X and is the answer not in the manual?
Questions and answers
I want to get the base off of the ProForm 520x, and get it out of my basement. It does not work.So basically disassemble for moving purposes.
To disassemble the Pro-Form 520X treadmill for moving, follow these steps:
1. Lower the Incline: Adjust the treadmill to the lowest incline position to prevent damage.
2. Unplug the Power Cord: Disconnect the treadmill from the power source.
3. Fold the Treadmill:
- Hold the treadmill at the designated locations.
- Bend your legs and keep your back straight to avoid injury.
- Lift the treadmill using your legs.
- Move your right hand to the appropriate position and hold firmly.
- Use your left hand to pull the latch knob to the left and hold it.
- Raise the treadmill until the catch passes the latch pin.
- Slowly release the latch knob, ensuring the catch is securely held by the latch pin.
4. Protect the Floor: Place a protective material under the treadmill to prevent floor damage.
These steps allow you to safely prepare the treadmill for moving.
This answer is automatically generated