Oricom OBH500-2 Quick Start Manual page 3

C. Connecting the Power Supply of the Parent Unit.
D. Desktop Stand of the Parent Unit
• The parent unit comes with a desktop stand attached to the back.
• To place the parent unit on a desk, simply pull out the stand, as shown.
Note:
Place the parent unit on a flat, even surface.
• Remove the pull tab from Parent Unit before use.
• Connect the small plug of the power adapter to the
parent unit, and the other end to mains power. Only
use the supplied adapter (5VDC/1000mA).
• A rechargeable battery allows the parent unit to
be used when not plugged into mains power.
The battery provides up to 8 hours operation of
the Parent Unit with the screen turned off. We
recommend charging for at least 4 hours before first
use, and charging the battery each time the Parent
Unit indicates that the battery is low.
• Press and hold the POWER button 0 on the top of
the Parent Unit to turn it ON.