Setting Up Your Digital Video Baby Monitor - Oricom OBH500-2 Quick Start Manual

2. Setting up your Digital Video Baby Monitor

A. Connecting the Power Supply for the Baby Unit
B. (Optional) Fixing magnetic mount on the wall
• Mark the position of the screw holes on the
wall.
• Install wall anchors (Not provided) suitable
for the wall type, and mounting screws if
required.
• Fasten the mounting screws (Not provided)
on the wall.
• Position the cable behind the base as
shown in the picture before attaching the
base on the wall.
• Insert the DC plug of the power adapter
into the DC socket on the back of the Baby
Unit.
• Connect the other end of the power
adapter to mains power.
• The baby unit will turn on and the power
indicator lights in a green colour.
Note
Only use the supplied power adapter
(DC5V/1000mA).
Pair button