Options; Before First Use - Progress PVS1540 User Manual

OPTIONS

Activate the Multitab option before you
set a programme. You cannot activate
the option while a programme oper-
ates.
Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse aid
and salt. The related indicators stay off.
The programme duration can increase.
How to activate the Multitab option
1.
Press and hold, at the same time,
and until the Multitab indicator
comes on.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
Acoustic signals
The acoustic signals operate when the ap-
pliance has a malfunction, when the adjust-
ment of the level of the water softener oc-
curs and when the programme is comple-
ted.
By default, the acoustic signals are on, but
it is possible to deactivate them.
How to deactivate the acoustic signals
1. Press the on/off button to activate the
appliance. Make sure that the appliance

BEFORE FIRST USE

1. Make sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener. Contact your local water au-
is in setting mode, refer to "Setting and
starting a programme".
2. Press and hold, at the same time, but-
ton and button
tors of buttons
start to flash.
3.
Press button
• The indicators of buttons
go off.
•
The indicator of button
to flash.
• The indicator
4.
Press button
goes off, the acoustic signals are deacti-
vated.
5. Deactivate the appliance to confirm the
setting.
How to activate the acoustic signals
1. Refer to 'How to deactivate the acoustic
signals', step (1) through (3).
2.
Press button
• The indicators of buttons
go off.
•
The indicator of button
to flash.
• The indicator
3.
Press button
comes on, the acoustic signals are ac-
tive.
4. Deactivate the appliance to confirm the
setting.
thority to know the water hardness in
your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
progress 19
until the indica-
, and
.
and
continues
comes on.
. The indicator
,
and
continues
is off.
. The indicator