Options - Progress PVX1555 User Manual

level increases. After level 6 you go to
level 0 and then start again from level 1.
4. Press the on/off button to confirm the
setting.
The rinse aid empty notification
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If you are using multi-tabs
containing rinse aid and you are satisfied
with the drying result, you can deactivate
the notification for refilling rinse aid.
However, we recommend that you always
use rinse aid for best drying performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
indicators
to flash.
2. Press .
• The indicators
go off.
• The indicator
• The end indicator indicates the
current setting: End indicator on =
the rinse aid dispenser is activated
(factory setting).

OPTIONS

Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
and until the
, , and start
, and
continues to flash.
3. Press
to change the setting.
End indicator off = the rinse aid dispenser is
deactivated.
4. Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is deactivated
but it is possible to activate it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
indicators
to flash.
2. Press
• The indicators
go off.
• The indicator
• The end indicator indicates the
current setting: End indicator off =
Acoustic signal off.
3. Press to change the setting.
End indicator on = Acoustic signal on.
4. Press the on/off button to confirm the
setting.
XtraDry
Activate this option when you want to boost
the drying performance. With the use of this
option, the duration of some programmes,
water consumption and the last rinse
temperature can be affected.
The option XtraDry is not a permanent
option and must be selected at every cycle.
Progress 29
and until the
, , and start
, and
continues to flash.