Table of Contents
Advertisement
Individually adjusting the headset
Labeling the headset with a name plate
Change the lettering of the name plate.
1. OPEN "Name Plate Maker"
2. TYPE
3. PRINT
4. CUT
14 |
SD Series - User Guide
WWW
www.sennheiser.com/
name-plate-maker
Instruction Manual
DW Office – HS
DW Pro1 – HS
DW Pro2 – HS
Testing the headset system and the sound quality
Testing the headset system and the
sound quality
Adjusting the headset system using the DIP switches
1
Press the Link button on the headset to disconnect an existing wireless
link between base station and headset.
The LEDs on the headset and on the base station go off.
2
Use a pointed object (e.g. a ball pen) to set the DIP switches to the
desired position.
1
2
Configuring the handset lifter/hook switch – DIP switches 1 and 2
The DIP switches 1 and 2 are only assigned a function on the SD BS,
SD BS ML and SD BS Phone base stations.
Switch position
Extra
Settings
1
2 3
4
5
6
Function
Manual operation
Lifts/hangs up the handset manually or using
the handset lifter (Sennheiser HSL 10).
Electronic hook switch (DHSG standard)
Call control via the headset system.
For faster link establishment, see Fast Link.
Electronic hook switch (MSH standard)
Call control via the headset system.
Fast Link for DHSG standard and HSL 10 handset
lifter
Recommended for frequent callers. Shorter battery
life. Fast link establishment without delay due to
hidden link to the base station.
SD Series - User Guide
| 15
Advertisement
Table of Contents
