Table of Contents
Advertisement
Cleaning and maintaining the headset system
Cleaning and maintaining the
headset system
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can short-circuit the elec-
tronics.
Keep all liquids far away from the product.
Do not use any solvents or cleansing agents.
Before cleaning, disconnect the base station from the mains power
supply.
Only use a dry and soft cloth to clean the product.
Clean the charging contacts of the base station and the charging con-
tacts of the headset from time to time using e.g. a cotton swab.
34 |
SD Series - User Guide
SD Office – HS
SD Pro1 – HS
SD Pro2 – HS
Cleaning and maintaining the headset system
Replacing the ear pads
For reasons of hygiene, you should replace the ear pads from time to time.
Spare ear pads are available from your Sennheiser partner.
SD Office – HS
1
Carefully remove the old ear pad from the ear cup. Make sure that the
fastening ring of the old ear pad is also removed from the ear cup.
2
Pull the collar
3
Turn the ear pad counter-clockwise over the notch until the collar com-
pletely surrounds the ear cup.
1
3
SD Pro1/Pro2 – HS
1
Carefully remove the old ear pad from the ear cup.
2
Attach the new ear pad to the ear cup by pressing firmly around the ear
pad.
1
B
of the ear pad over the notch
A
of the headband.
2
B
A
2
SD Series - User Guide
| 35
Advertisement
Table of Contents
