Pairing The Headset With Wireless Devices - Sennheiser GSP 670 User Manual

6 GettInG stARteD

Pairing the headset with wireless devices

CAUTION
!
Danger of malfunction!
the transmitted radio waves of mobile devices can impair the operation of sensitive and unprotected devices.
only make calls with the headset in locations where wireless Bluetooth transmission is permitted.
You can connect the headset either via Bluetooth to mobile device (e.g. smartphone, tablet)
Dongle GsA 70 to a PC or Ps4™. In order that data can be transmitted wirelessly, you have to pair your headset first.
the delivered Dongle is already paired with the headset.
Pairing the headset via Bluetooth with a mobile device
1
click
3x
"Power on"
turn the main volume wheel over a slight resistance to
turn the headset on.
slide and hold the Pairing slider until the LeD
alternately flashes blue and red.
the headset is in pairing mode.
3
select "GsP 670" to establish a Bluetooth connection
to the headset.
GSP 670 Wireless headset |
"Pairing"
Found Bluetooth devices
Mobile Jane
Mobile Nick
GSP 670
< 20 cm
GSA 70 Dongle
the headset complies with the Bluetooth 5.0 standard.
Bluetooth devices need to support the "hands free profile"
(hFP), the "headset profile" (hsP) or the "advanced audio
distribution profile" (A2DP).
the headset can save up to eight paired devices.
If you pair the headset with a ninth device, the first
device in the pairing list will be overwritten. If you want
to re-establish a connection with this device, you have to
pair it again.
2
2s
enable the Bluetooth visibility on your mobile device
(see instruction manual of your mobile device).
start a search for Bluetooth devices.
All available devices in the proximity of the mobile
device are displayed.
4
once the headset is paired with the mobile device, the
LeD goes off.
or together with the
3x
"Device connected"