Table of Contents
Advertisement
Making calls using the headset
Managing calls using a call control functionality (EHS, HSL 10)
Accepting a call: You hear a ring tone in the headset.
Press the Link button on the headset to accept the call.
The handset lifter/electronic hook switch lifts the handset.
Making a call:
Dial the desired number.
Press the Link button on the headset to establish a link between base
station and headset.
The phone connection is established automatically.
Ending a call:
Press the Link button. If the other party hangs up, your telephone and
your headset become automatically ready to receive the next call.
Frequent callers who use an electronic hook switch with DHSG capability
are recommended to activate the "Fast Link" function for faster link estab-
lishment (see page 15):
Switch position
Switching a call between headset and fixed line phone
Press the Link button on the headset to switch between headset and
handset of the fixed line phone during an ongoing call.
In case of a fixed line phone with a handset lifter/an electronic hook
switch, this switching can only be done on the fixed line phone.
24 |
SD Series - User Guide
Function
Fast Link (only when DHSG standard is used)
Recommended for frequent callers. Shorter battery
life. Fast link establishment without delay due to
hidden link to the base station.
Making calls using the headset
Calling via the computer using the headset
If you want to use the headset to accept, make or end calls, you have to
establish a wireless link between headset and base station. You can choose
between manual and automatic link establishment (see "Auto Link" on
page 16):
Switch position
Managing calls without using
Accepting a call: The softphone signals that you are receiving a call. You
hear a ring tone in the headset.
Click on "Accept call" on your softphone.
Making a call:
Press the Link button on the headset to establish a link between base
station and headset. If the "Auto Audio" function is activated, this step
is not necessary (see page 19).
Start the call using your softphone.
Ending a call:
End the call using your softphone.
Function
Manual link establishment
When taking the headset out of the base station,
you have to manually establish the wireless link
between headset and base station.
Automatic link establishment – Auto Link
When taking the headset out of the base station,
a wireless link is automatically established between
headset and base station.
the "HeadSetup" call control functionality
SD Series - User Guide
| 25
Advertisement
Table of Contents
