Pairing The Headset With Bluetooth Devices - Sennheiser MB 110 WN Instruction Manual

Putting the headset into operation
paired +
paired
connected

Pairing the headset with Bluetooth devices

CAUTION
Danger of malfunction!
The transmitted radio waves of mobile phones can impair the operation of
sensitive and unprotected devices.
Only make calls with the headset in locations where wireless Bluetooth
transmission is permitted.
The headset complies with the Bluetooth 5.0 standard. In order that data
can be transmitted wirelessly using Bluetooth technology, you have to
pair your headset with Bluetooth devices that support the Apple
"iPod Accessory Protocol" (iAP2) or the Android "Serial Port Profile" (SPP)
and has the WHITE NOISE application installed.
The headset can save the connection profiles of up to eight Bluetooth
devices with which it has been paired. After switch-on, the headset
automatically tries to connect to the last connected Bluetooth device. You
can only connect a second Bluetooth device after having switched off the
first Bluetooth device.
If you pair the headset with a ninth Bluetooth device, the saved connection
profile of the least used Bluetooth device will be overwritten. If you want
to re-establish a connection with this Bluetooth device, you have to pair
the headset again.
MB 110 | 11