Installation - Electrolux ESF2300DW User Manual

16 www.electrolux.com
Problem
Scale particles on the
dishes.
There are streaks or milky
stains on glasses and
dishes.
There are bluish layers on
glasses and dishes.
The dishes are wet and
dull.

10. INSTALLATION

10.1 Assembly
Make sure to position the
appliance with minimum
space of 50 mm on both
sides of fully open door.
• Keep 5 mm distance between both
sides of the appliance and the
cabinet. There are two possibilities for
the cabinet opening for the appliance.
• Power cord, drain hose and water
supply line opening. To facilitate a
Possible cause
The salt container is emp‐
ty.
The cap of the salt contain‐
er is not closed correctly.
The level of the water soft‐
ener is too high.
The rinse aid dosage is too
high.
The detergent can be the
cause.
A programme without a
drying phase has been se‐
lected.
The rinse aid dispenser is
empty.
100
min.
80
443mm
min.
550 mm
min.
555mm
Possible solution
Fill the salt container with
specific salt for dishwash‐
ers.
Make sure that the salt
container is correctly
closed.
Set the water softener to a
lower level.
Set the rinse aid dispenser
to a lower position.
Try a different brand of de‐
tergent.
Set a programme with a
drying phase.
Fill the rinse aid dispenser
with rinse aid.
proper installation, position the
opening to the right or the left of the
appliance.
10.2 Electrical connection
WARNING!
Do not use an extension
cord or and adapter plug
with this appliance.
WARNING!
Do not cut or remove the
earthing.
WARNING!
Make the electrical
connection with the power
cord.
For rating voltage check the
rating plate.