Maintenance; Unit Storage - HOMCOM A020G Instruction Manual

VI. Maintenance
Cleaning: before cleaning and maintenance, turn off the machine and unplug the
plug.
1. Clean the surface
Clean with surface of machine with a wet soft cloth. Don't use chemicals, such as
benzene, alcohol, gasoline, etc.; otherwise, the surface of the air conditioning will be
damaged or even the whole machine will be damaged.
2. Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of the air conditioning is
reduced, be sure to clean the filter screen once every two weeks.
3. Clean the upper filter screen frame
1) Unscrew one screw fixed by EVA filter net and back shell with screwdriver, and take
out EVA filter net.
2) Put the EVA filter screen into warm water with neutral detergent (about 40℃ / 104℉)
and dry it in the shade after rinsing clean.
VII. Unit Storage:
1: Unscrew the rotary knob, unplug rubber stopper, and discharge the water in the water
pan into other water containers or directly tilt the body to discharge the water into other
containers.
2: Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state
until the drainage pipe becomes dry, so as to keep the inside of the body in a dry state
and prevent it from mildewing.
3: Turn off the machine, unplug the power plug, and wrap the power cord around the
wrapping post; install rubber stopper and the rotary knob.
4: Remove the exhaust pipe and keep it properly.
5: Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place,
keep it out of the reach of children, and take dust control measures.
6: Remove batteries of the remote control and keep them properly.
Note: Ensure that the body is placed in a dry place and keep all machine components
properly.
12