Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sentera Controls TCMF8-DM
Summary of Contents for Sentera Controls TCMF8-DM
- Page 1 TCMF8-DM UNIVERSAL FAN SPEED CONTROLLER Mounting and operating instructions...
-
Page 2: Table Of Contents
INTENDED AREA OF USE TECHNICAL DATA STANDARDS WIRING AND CONNECTIONS LED INDICATIONS MOUNTING INSTRUCTIONS IN STEPS VERIFICATION OF INSTALLATION TRANSPORT AND STORAGE WARRANTY AND RESTRICTIONS MAINTENANCE MIW-TCMF8-DM-EN-000 - 06 / 06 / 2023 2 - 9 www.sentera.eu back to the table of contents... -
Page 3: Safety And Precautions
In case there are any questions that are not answered, please contact your technical support or consult a professional. MIW-TCMF8-DM-EN-000 - 06 / 06 / 2023 3 - 9 www.sentera.eu... -
Page 4: Product Description
UNIVERSAL FAN SPEED CONTROLLER PRODUCT DESCRIPTION The TCMF8-DM are universal fan speed controllers with Modbus RTU communication. They have two analogue / modulating inputs, two triac outputs and two thermal motor protection inputs. They provide on demand ventilation control according to sensor measurements and run according to defined downloadable functionalities (via Senteraweb) and schedules. -
Page 5: Standards
Part 17: ► Specific conditions for Broadband Data Transmission Systems; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU MIW-TCMF8-DM-EN-000 - 06 / 06 / 2023 5 - 9 www.sentera.eu back to the table of contents... -
Page 6: Wiring And Connections
6 - PROG header, P1 Put a jumper onto pins 3 and 4 and restart the supply to enter 1 2 3 4 5 bootloader mode MIW-TCMF8-DM-EN-000 - 06 / 06 / 2023 6 - 9 www.sentera.eu back to the table of contents... -
Page 7: Led Indications
Off level activated for input 1/2 or both. System Error – TK1 or TK2 activated (when enabled). MOUNTING INSTRUCTIONS IN STEPS Before you start mounting the TCMF8-DM, read carefully “Safety and Precautions” and follow these steps. Choose a smooth solid wall surface for installation. Follow these steps: Switch OFF the main power supply. - Page 8 “Link to solution” to download the selected firmware into the connected devices. After the download there is the possibility to use the installation stand alone or to keep the internet gateway connected. MIW-TCMF8-DM-EN-000 - 06 / 06 / 2023 8 - 9 www.sentera.eu...
-
Page 9: Verification Of Installation
In case of heavy pollution, clean with a non-aggressive product. In these circumstances the unit should be disconnected from the supply. Pay attention that no fluids enter the unit. Only reconnect it to the supply when it is completely dry. MIW-TCMF8-DM-EN-000 - 06 / 06 / 2023 9 - 9 www.sentera.eu...
Need help?
Do you have a question about the TCMF8-DM and is the answer not in the manual?
Questions and answers