Transportation Safety; Installation Safety - Grundig GEBD19300DX User Manual

of electric shock. Unplug the
product or turn off the fuse
from the fuse box.
If your product has a power
cable and plug:
• Never put the product plug
into a broken, loose, or out-of-
socket plug. Make sure the
plug is fully inserted into the
socket. Otherwise the connec-
tions may overheat and cause
a fire.
• Avoid inserting the device into
plugs that are greasy, unclean,
or potentially exposed to wa-
ter (such as those near a
worktop where water may es-
cape). Otherwise there is a risk
of short circuit and electrocu-
tion.
• Never touch the plug with wet
hands!
• Pull the plug out of the socket
using the plug's body rather
than the cord itself.
1.4 Transportation
Safety
• Disconnect the product from
the mains before transporting
the product.
• The product is heavy, carry the
product with at least two
people.
• Do not use the door and / or
handle to transport or move
the product.
• Do not place items on the ap-
pliance. Carry the appliance
vertically.
• The product must not be
transported when there is wa-
ter in the it. Make sure that
there is no water in the
product before transport.
• When you need to transport
the product, wrap it with
bubble wrap packaging mater-
ial or thick cardboard and tape
it tightly. Secure the moving
parts of the product firmly to
prevent damage.
• Before the product is installed,
check the product for any
damage after transport. Con-
tact the importer or the au-
thorized service centre if dam-
aged.
1.5

Installation Safety

• Before beginning the installa-
tion, de-energize the power
line to which the product will
be connected by turning off
the fuse.
• Always wear protective gloves
during transport and installa-
tion. Otherwise there is a risk
of injury from sharp edges!
• Before the product is installed,
check the product for any
damage. Do not have it in-
stalled if the product is dam-
aged.
EN / 7
EN
DE