Keithley 486 Instruction Manual page 214

APPENDIX D
Controller Programs
The following programs have been supplied as a simple
aid to the user and are not intended to suit specific needs.
Each program allows you to send a device-dependent
.
command string to the instrument and obtain and dis-
play a string from the instrument.
.
.
Programs for the following controllers are included:
. A BASIC program for an IBM PC/XT/AT with a
Capital Equipment Corporation PC0488 Interface
(Keithley Model PC4S-CEC IEEE-488 Jnterface
Card).
. A program written with the ASYST software package
(available from Keithley J.nstnment.4 for an IBM PC/
XT/AT with a Capital Equipment Corporation
PC0488 Interface.
A BASIC program for an IBM PC/XT/ AT with IOtecb
Driver488 5dtware.
A BASIC program for an IBM PC/XT/AT with a Na-
tional GPIB PC Interface.
A BASIC program for a Hewlett-Packard Model 9000
Series 200/300 computer.
NOTE
To make sure that the instrument is in a
proper trigger mode (to avoid bus hang up), it
is recommended that factorv initialization be
performed before running&y of the follow-
lng programs.
D-l