Table of Contents
Advertisement
M A I N T E N A N C E G U I D E L I N E S
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to ensure proper function and an extended life. The
frequency of cleaning depends on the environment in which the device operates: damp, smoky
or particularly dirty environments can cause greater accumulation of dirt on the device's
optics. Clean periodically with a soft cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life. There
are no user serviceable parts inside this device. Please refer all other service issues to an
authorized Elation service technician. Should you need any spare parts, please order genuine
parts from an authorized Elation dealer.
Please refer to the following points during routine inspections:
• A detailed electrical check by an approved electrical engineer every three months, to
make sure the circuit contacts are in good condition and prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall
out during normal operation, resulting in damage or injury as larger parts could fall.
• Check for any deformations on the housing, rigging hardware and rigging points (ceiling,
suspension, trussing). Deformations in the housing could allow for dust to enter into the
fixture. Damaged rigging points or unsecured rigging could cause the fixture to fall and
seriously injure a person(s).
• Electric power supply cables must not show any damage, material fatigue or sediments.
8
Advertisement
Table of Contents
