Plugging In And Ironing - Silvercrest SDBT 2400 A1 Operating Instructions Manual

4) Fill the water tank
the base
(see Fig. 5). Pour out any excess water. The maximum filling capacity of the
water tank
Fig. 5
5) Close the lid of the filler opening Easy-Fill

Plugging in and ironing

Note
► While it is heating up, always place the steam iron on its base
1) Plug the power plug into a mains socket.
2) The steam iron starts to heat up. The hand indicator LED
indicator LED
3) The steam iron is heated up and ready for use when the heat indicator
8
LED
Note
► During ironing, the heat indicator LED
is kept constant by the thermostat. You can continue ironing normally in the
meantime.
► As soon as you hold the steam iron by the handle
6
LED
SDBT 2400 A1
e
to the mark MAX at the most. Place the steam iron on
0
and check that the filling level does not exceed the mark MAX
e
is approx. 320 ml.
8
flash.
lights up continuously.
lights up continuously.
2
.
6
and the heat
8
may flash as the set temperature
7
, the hand indicator
GB │ IE
0
.
│
11 ■