Plugging in and ironing
Dry ironing without steam is possible at all temperatures, steam ironing is only
possible from the setting range
1) Insert the plug into a mains power socket .
CAUTION – PROPERTY DAMAGE!
►
If the clothing care instructions forbid ironing (
be ironed . Ignoring this warning could lead to permanent damage to the
clothing item .
2) Check the care instructions on the labels in garments to see if they are suitable
for being ironed, and at which temperature setting .
Temperature control
3) Select the appropriate temperature setting with the temperature control 8 .
NOTE
►
Always place the iron on the base 0 while it heats up . If you place the
iron on the sole of the iron q and do not move it, the automatic switch-off
will be activated after 30 seconds (see section Automatic switch-off)
and the appliance stops heating up .
■
The temperature control lamp 7 lights up . When the set temperature has been
reached, the temperature control lamp 7 goes out .
4) Wait until the temperature control lamp 7 goes out .
■
To moisten the laundry, press the spray button
■
This function is suitable for very dry and very crumpled garments .
Steam ironing
1) Set the steam control 3 to the desired steam setting .
2) The temperature control 8 must be set to at least the
Otherwise no steam will be produced .
■
8
│
GB │ IE │ NI │ CY
symbol 8
on the temperature control 8 .
), the garment must not
Material type
Synthetics
Silk, wool
Cotton, linen
5 .
setting .
SDB 2400 F4