Filling The Water Tank - Silvercrest SDBT 2400 A1 Operating Instructions Manual

Filling the water tank

DANGER! RISK OF ELECTRIC SHOCK!
► Always disconnect the plug from the mains socket before filling the water
e
tank
WARNING!
► Allow the appliance to cool down before filling the water tank
Otherwise, there is risk of burns!
ATTENTION!
► Fill the water tank
will damage the steam iron.
Note
► If the mains water in your location is rated as hard, it is recommended that
you mix the mains water with some distilled water. Otherwise, limescale
deposits can adversely affect the appliance functions.
Mix tap water with distilled water as described in this table:
► Ask your local water utility about the water hardness in your area.
1) Make sure that the steam control
Fig. 2
SDBT 2400 A1
. There is a risk of electric shock!
e
only with tap water or distilled water. Otherwise, you
Water hardness
very soft/soft
medium
hard
very hard
Ratio of distilled water
to tap water
0
1 : 1
2 : 1
3 : 1
3
is set to position 0 (see Fig. 2).
e
.
GB │ IE │
9 ■