Safety Information - Silvercrest SDBT 2400 A1 Operating Instructions Manual

Safety information

DANGER! RISK OF ELECTRIC SHOCK!
The voltage of the power source must correspond with the
►
details given on the type plate of the appliance.
To avoid potential risks, arrange for a defective appliance to
►
be checked and possibly repaired by qualified technicians,
or contact our Customer Service department.
To prevent accidents, have defective plugs and/or power
►
cables replaced immediately by an authorised specialist,
our Customer Service or a similarly qualified person.
When disconnecting the appliance from the power source,
►
pull only on the plug itself, never on the cable.
Never bend (kink) or crush the power cable, and always
►
route it in such a way that it cannot come into contact with
hot surfaces and so that no one can step on or trip over it.
Unplug the appliance from the mains before cleaning,
►
before filling the water tank and after each use.
Always unroll the power cable fully before switching on
►
and do not use an extension cable.
Never touch the power cable or the plug with wet or damp
►
hands.
Never use the steam iron next to water contained in a bath,
►
shower, wash basin or other vessels. The proximity of water
is hazardous, even if the appliance is switched off.
SDBT 2400 A1
self clean (self-cleaning function)
auto off (automatic switch-off)
Caution, hot surface!
GB │ IE │
3 ■