C- WIRING / INSTALLATION
C- WIRING / INSTALLATION
Before you permanently attach your door station and monitor, test your product. (page 24)
C1- Monitor installation
Lithium battery
Protective film
Battery compartment
Battery compartment cover
To activate battery, please remove protective film from the battery prior to use.
The battery needs to be replaced if it doesn't recover its full storage capacities after recharging.
When replacing the battery, make sure using good quality re-chargeable lithium battery. Never use other battery or
conventional alkaline battery.
Charging indoor monitor
Before initial operation, you should fully charge the indoor monitor for about 5 hours.
20
EN
LED lights
Sensor light
Monitor
Bracket
Microphone
Camera
Call button
Speaker
Expansion tube
Screw
Monitor
M4*30 Screw