Start; Stop; Adjustment Of Air; Adjustment Of Product - Manual Block - Nilfisk-Advance MultiFoamer Pegasus 120 Directions For Use Manual

The mainstation is now ready for operation.
7.1.1.

Start

1. Make sure that the water and air supply to the
unit is open. For air see layout drawing. In case
of central chemical supply this must be activated
too.
7.1.2.

Stop

1. Stop program if running.
2. Close the water supply (see drawing 110005285-
page 14).
3. Close the air supply (see drawing 110005288-
page 14).
4. Deactivate chemical supply by pulling up the
suction hose or removing the User Pack.
Due to the following it is very important
to close water, air and chemical supply
when the unit is not in use.
• If the air supply is open when the
unit is not in use - air might seep
into the water pipe - which means
that the system has to be bled
again.
7.1.3.

Adjustment of air

Remove the cover from the unit.
Adjust the air pressure on the reduction valve until an
appropriate foam quality is reached.
When setting the regulator, carefully
pull up the knob and turn it clockwise
for pressure increase and counter clock
wise for pressure decrease.
18
7.1.4.

Adjustment of product - manual block

Adjust product for the manual block by using a limiting
nozzle located in the suction nipple of the non-return
valve (refer to image 110009231).
• Remove the unit cover.
• Replace the nozzle with a smaller or larger one to
adjust concentration. Refer to the below table for
guidance.
110005290
A
Nozzle colour
Light blue
Turquios
Yellow
Orange
Green
Black
Beige
Blå
White
Red
7.1.5.

Adjustment of product - automatic block

Adjust product for the automatic block by using a limiting
nozzle located in the suction nipple of the solenoid valve
(image 110009221).
• Remove the unit cover.
• Replace the nozzle with a smaller or larger one to
adjust concentration. Refer to the table for guidance.
110009231
→
Concentration by mm
20 Bar /290PSI
0.64% 0.3
1.07% 0,4
1.79% 0.5
2.36% 0.6
3.15% 0.7
4.26% 0.8
5.05 % 0.9
6,12% 1.1
7.00% 1.3
7.35% 1.5
110009221
Inch
0.012
0.016
0.020
0.024
0.028
0.032
0.036
0.044
0.052
0.060