T26 / T48 / T63 Original instructions Table of contents Instructions for use ......................2 Operator’s safety ..........................2 General information for using the vacuum cleaner ................2 Proper uses ............................. 2 Improper Use ........................... 2 Dust emissions in the environment ....................3 General recommendations ......................
T26 / T48 / T63 Original instructions Instructions for use Read the operating instructions and comply with the important safety recommendations identified by the word WARNING! Operator’s safety Proper uses This vacuum cleaner is suitable for commercial use, in hotels,...
T26 / T48 / T63 Original instructions Dust emissions in the environment Indicative values of performance: ■ normal version (not suitable for vacuuming hazardous dust): retains at least 99.1 % of particles measuring ≥ 3 μm. General recommendations WARNING! If an emergency situation occurs: ■...
T26 / T48 / T63 Original instructions Vacuum cleaner description Vacuum Cleaner Parts and Labels Accessories Various accessories are available; refer to the manufacturer’s Figure 1 accessory catalogue. Identification plate which includes: Model Code, Class, Technical Specifications (see table WARNING! on page 6), Serial No., CE Mark, Year of manufacture,...
T26 / T48 / T63 Original instructions Wet and dry applications WARNING! [ NOTE ] When the vacuum cleaner is operating, do not: ■ Crush, pull, damage or tread on the cable that The supplied filters and the bag (if applicable) must be connects to the electrical mains.
T26 / T48 / T63 Original instructions Technical specifications Parameter Units Voltage @ 60 Hz Volts Power, max Waterlift, max Inches H2O 82.6 140.5 82.6 Airflow, max 222.4 222.4 345.3 Filter Area, main Sq. ft Filter Area, optional HEPA Sq. ft 37.7...
T26 / T48 / T63 Original instructions Controls, indicators and connections Shaking the primary filter (Fig. 7) Depending on the vacuumed dust quantity and if the pointer Figure 4 of the vacuum gauge switches from the green zone (2) to the...
T26 / T48 / T63 Original instructions Tilting discharge device replacement and Maintenance, cleaning and decontamination Figure 9 WARNING! Tilting discharge device assembly The precautions described below must be taken during all the maintenance operations, including ■ Fasten the hopper to the filtering chamber, by inserting it cleaning and replacing of the filter.
T26 / T48 / T63 Original instructions Primary filter replacement Before proceeding with these operations, turn the vacuum cleaner off and disconnect the plug from the power socket. Figure 13 ■ Unlock the safety bolt (3). Vacuum hose ■ Use the lever (2) to release the cap (1) then pull it up and Band out of the vacuum cleaner.
T26 / T48 / T63 Original instructions Separator cleaning and replacement (if Wiring diagrams equipped) Basic model Figure 17 Figure 19 Separator Plug Band Vacuum cleaner Cover Circuit breaker Screws Model [ NOTE ] Part Item If there is only a dust deposit on the separator (1) allow the dust to drop through the central hole.
T26 / T48 / T63 Original instructions Recommended spare parts The following is a list of spare parts that should be kept ready at hand in order to speed up maintenance operations. Refer to the manufacturer’s spare parts catalogue when ordering spare parts.
T26 / T48 / T63 Original instructions Troubleshooting Problem Cause Remedy Shake the filter. Replace it if this is not Clogged primary filter sufficient. Clogged vacuum hose Check the vacuum hose and clean it. The vacuum cleaner suddenly stops Check the setting.
Page 15
07AJ814 3000 W Kg 71 Ref.No: 4010300258 50/60 Hz ME77 T26 / T48 / T63 13 A 07AJ814 3000 W Kg 71 Ref.No: 4010300258 50/60 Hz ME77 09/2010 C356...
Need help?
Do you have a question about the T26 and is the answer not in the manual?
Questions and answers