Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Tools needed for all installations:
=)
e=-——>
Flat-blade screwdriver
#2 Phillips screwdriver
1/4" nut driver or socket
wrench (recommended)
Tin snips (new vent
installations)
Tape measure
Vent clamps
SVS
Level
Pliers
qo
Adjustable wrench that
opens to 1" (25 mm)
or
hex-head socket wrench
Utility knife
Caulking gun and compound
(for installing new exhaust vent)
Tools needed for gas installations:
e——7 fy)
8" or 10" pipe wrench
8" or 10" adjustable wrench
(for gas connections)
Pipe-joint compound
resistant to LP gas
Parts supplied:
Leveling legs (4)
Parts package is located in dryer drum. Check that all parts
are included.
Parts needed:
Check local codes. Check existing electrical supply and venting.
See "Electrical Requirements" and "Venting Requirements"
before purchasing parts.
Mobile home installations require metal exhaust system
hardware. For more information, see "Assistance or Service"
section in your "Use and Care Guide".
Optional Equipment: (Not supplied with dryer)
Refer to your "Use and Care Guide" for information about
accessories available for your dryer.
Advertisement
Table of Contents
