Table of Contents
Advertisement
Available languages
Available languages
Exhaust hoods:
@
Must be at least 12" (805 mm) from ground or any object
that may obstruct exhaust (such as flowers, rocks, bushes,
or snow).
Recommended Styles:
Louvered Hood
Box Hood
Acceptable Style:
Angled Hood
Elbows:
@
45° elbows provide better airflow than 90° elbows.
Clamps:
@
Use clamps to seal all joints.
@
Exhaust vent must not be connected or secured with screws
or other fastening devices that extend into interior of duct
and catch lint. Do not use duct tape.
improper venting can cause moisture and lint to collect
indoors, which may result in:
@ Moisture damage to woodwork, furniture, paint, wallpaper,
carpets, etc.
@ Housecleaning problems and health problems.
See "Venting Kits" for more information.
10
Plan Vent System
Recommended
exhaust installations
Typical installations vent the dryer from the rear of the dryer.
Other installations are possible.
B
___L\
°
D
"E
A
F
G
[
B
2 enim csr
TD Ta
A EATS
H
A. Dryer
E. Clamps
B. Elbow
F. Rigid metal or flexible metal vent
C. Wall
G. Vent length necessary to connect elbows
D. Exhaust hood
H. Exhaust outlet
Optional exhaust installations:
Each kit includes step-by-step instructions. For ordering
information, see "Venting Kits".
Gh)
é
Fire Hazard
Cover unused exhaust holes with a manufacturer's
exhaust cover kit.
Contact your local dealer.
Failure to follow these instructions can result in death,
fire, electrical shock, or serious injury.
Standard rear offset exhaust installation
Advertisement
Table of Contents
