Table of Contents
Advertisement
Available languages
Available languages
7
3. Lift door off top screws
Lift door until top screws in dryer cabinet are in large part of
hinge slot. Pull door forward off screws. Set door (handle side
up) on top of dryer. Remove top screws from dryer cabinet.
7
4. Remove screws from hinges
Remove screws attaching hinges to door.
f—
5,
Remove
screws from door
Remove screws at top, bottom, and side of door
(4 screws). Keep door screws separate from hinge screws
as they are diferent sizes. Holding door over towel on dryer,
grasp sides of outer door and lift to separate it from inner
door.
NOTE: Do not pry apart with putty knife or screwdriver.
Do not pull on door seal or plastic door catches.
16
( 6.
Rotate outer door
Take outer door and rotate in 180° and set it back down on
inner door. Be certain to keep cardboard spacer centered
between doors. Reattach outer door panel to inner door
panel so handle is on the side where hinges were just
removed. Insert 4 door screws.
cr
q.
Flip door over
Flip door over so handle side is down.
(
.
8. Attach door hinges
Reattach door hinges to dryer door so that the larger hole is
at the bottom of the hinge.
Advertisement
Table of Contents
