Advertisement
(hi HTHTUI
ALARM
switch
Set to ON so that the alarm sounds when the WARNING
lamp @ lights up or
blinks.
Set to OFF to cut off the sound.
MONITOR switch
Select the sounds to be monitored from the speaker or earphone.
PB: To monitor simultaneous playback sound during recording
EE: To monitor the E-to-E sound
DISPLAY switch
Changes the counter display.
U-BIT: To set or display the user's bit, or to display the real time set into VITC
user's bit
TC:
To set or display the time code
CTL:
To display the CTL
LIGHT switch
Set to ON to illuminate the display window or the level meters.
EARPHONE jack (mini jack)
Connect an 8&ohm earphone. Select the sounds to be monitored with the
MONITOR switch @.
The warning sound corresponding to the warning lamp or indicators is also heard.
When an earphone is connected, the sound from the speaker @ is cut off.
SHIFT button
Press so that the number you want to set blinks. The blinking digit shifts to the
right with each press.
ADVANCE
button
Press to increase the blinking number. Keep pressing to increase continuously.
HOURS METER
Indicates the total elapsed time that the video head drum has rotated.
Replace with new one when the meter shows the maximum
number of hours
(1000 hours).
10 (E)
Advertisement
