Advertisement
-
5 Press the VTR START button or the VTR button and the recording begins.
VTR, VTR START
During recording, the REC lamp (red) in the viewfinder is lit.
\
Y
6 To stop recording, press the VTR START button or the VTR button again.
The VTR enters the pause mode and the REC lamp will go off.
To check the luminance signal during recording
Keep pressing the RET button on the lens. The playback picture will appear on the
viewfinder screen. The playback sound of the audio channels 1 and 2 can also be
monitored when the MONITOR SELECT LNG/AFM
switch is set to LNG.
To check the chrominance signal during recording
Keep pressing the CTDM
PB button of this unit and the RET button on the lens.
The chrominance signals of the recording picture appear on the viewfinder screen in
monochrome.
Viewfinder screen
R-Y signal
B-Y signal
Depending on the subject matter, disturbances in some
Parts of the picture in the viewfinder may occur during
monitoring of the simultaneous
playback. These
disturbances,
however, will not be recorded.
43 (E)
Advertisement
