Advertisement
IHU NETH
Notes on using the battery pack and the external battery at the same time
AC power
When the battery pack is installed and when the external battery connected to the DC
IN connector is low and needs to be charged, you can have the installed battery pack
supply the power to continue the operation. Also, when the battery pack being used
becomes weak, you can continue the operation by connecting the external battery.
(However, noise may appear when you change the power source.)
¢ In case that the battery as the external power source is low when the battery
pack is installed
Remove the DC output cord of the external battery from the BVV-5PS to change the
power source from the external battery to the battery pack. Replace the external
battery with a fully charged battery as soon as possible because the battery pack
has already been partially consumed (the time of the continuous operation for the
BVW-505P is approx. 10 minutes for the NP-1, and dozens of minutes for the BP-90/
90A.)
First change the external battery and then, change the battery pack. If you change
the battery pack first, the operation will stop then.
Use an optional AC-500CE/500 AC adaptor.
to ac outlet
AC power
adaptor
n
AC-500CE/500
C
to
POWER
switch
~ ON
22 (E)
Advertisement
