Advertisement
o
2 )
3]
Battery case
Install
a Sony battery pack NP-1 or NP-1A (optional).
CH-1+ 48V
switch
Connect the external microphone to the AUDIO
IN CH-1 connector. And set the
switch to ON to supply power from the unit to the microphone.
DC IN (external power input) connector (XLR, 4-pin)
To operate the unit on AC power, connect the DC power cord of an
AC-500CE/500 AC adaptor.
AUDIO IN (input) connectors (XLR, 3-pin)
Connect audio equipment or a microphone to any of the CH-1 to CH-4
connectors.
GENLOCK
VIDEO IN (video input for time code slave lock) connector (BNC)
Inputs the reference video signals to lock the built-in time code generator.
TC IN (time code input for time code slave lock) connector (BNC)
Inputs the time code to lock the built-in time code generator.
TC OUT (time code output for time code slave lock) connector (BNC)
Connect to the TC IN connector of another VTR to lock the built-in time code
generator of another VTR to that of this unit.
ENCODE VIDEO OUT (video output for time code slave lock) connector (BNC)
Connect to the GENLOCK VIDEO IN connector of another VTR to lock the built-in
time code generator of another VTR to that of this unit.
Camera connector (50-pin)
Connect to the 50-pin connector on the camera or other equipment.
VA-5P connectors (4-pin)
Connect to the BVV-5PS connectors of the VA-5P VTR composite/component
adaptor.
15 (E)
Advertisement
