Digital Monitoring Products XF6 Series Installation And Programming Manual page 24

For example, if the current option is selected as YES and you want to change it to NO, on Thinline or Aqualite keypads
press the third select key. On Graphic Touchscreen keypads touch select area 3. The display changes to NO. Press CMD
to display the next option.
bEGIN A PROGRAMMING SESSION
1. Momentarily place the Reset jumper over both of the RESET pins to reset the panel.
2. Enter the code 6653 (PROG) and press CMD.
3. The keypad displays: PROGRAMMER.
XF6 Series Installation and Programming Guide
Digital Monitoring Products
19