Advertisement
Switch the camera on.
"PC-MODE?' appears on the LCD monitor.
` Switch the PC on and start up the application software.
Perform all subsequent operations from your personal computer. Refer to the
manuals supplied with the application software for information on how to use
the software.
YIMPORTANT
' If the power is switched off during data transmission, the image data will not be
received correctly. To avoid data transfer failure due to depleted battery charge,
use the PDR-ACM1 AC Adapter (included or sold separately).
* The Auto Power Off function does not operate in PC mode.
* To switch the camera to another mode after using PC mode, switch the camera off,
select the new mode and then switch the camera back on.
' Each time you press the <DISP)button, LCD monitor operation changes in the
following sequence:
>
On-screen
On-screen
dispiay(initial status)
display OFF
75
Advertisement
