Advertisement
PROTECT
01-0039 | A confirmation screen appears.
<UNPROTECT
ALL>
Bok?
OK<EXE>
CANCEL<¥>
Press the <MENU/EXE) button.
* Press the <MENU/EXE)> button to remove the protection or press the <W)
button to exit without removing the protection.
Note
Each time you press the <DISP)button, LCD monitor operation changes
in the following sequence:
Single-frame playback + menu
Multi-frame playback
|
display (initial status)
+ menu display
Write Protection
To prevent the inadvertent erasing of important
data, stick a write-protect seal (A) over the write-
protect area (B) on the SmartMedia card. This seal
makes it impossible to record data to or erase data
from the card. To record or erase data, remove the
seal.
VIMPORTANT
* The write protection may not function if the seal becomes soiled. Use a soft, dry
cloth to wipe away any soiling. Removed stickers cannot be reused.
* Use only the labels or write-protect stickers supplied with the SmartMedia.
` Take care not to cut your fingers on the edge of the write-protect sticker.
: Ensure that that the label is attached within the designated area (C).
Advertisement
